Liquid Spa Up™
Liquid pH-lifter. Increases critical pH levels without mixing with water.
- Increases pH value and alkalinity
- Easier to use than granules
Frequency: as required
- Always work with a small dose and allow the water time to settle before re-testing. One large dose at a time causes the pH value to fluctuate too much.
- Turn on the pumps.
- Add 2 tablespoons (30 ml) of Liquid Spa Up™ to the water.
- Test the water again after 10 minutes.
- Repeat steps 1 to 3 until the pH value is in the range 7.2-7.8 and the Total Alkalinity value is in the range 80-120 ppm.
- It is much easier to adjust the pH value when using liquid pH lifters. If you use pH granules, you must always dissolve them in water before adding them to the whirlpool.
- No premixing with water necessary
- Very easy to dose
- Chlorine Disinfectants
- Bromine Disinfectant
- Mineral Disinfectant
Content: 946 ml